Click here if this message is unreadable.

Dear business partner,
We are pleased to present our new system of Esthetic Abutments for Internal and External Hex. Connection.

Esthetic Abutments

Esthetic titanium abutments with sloping shoulder end. The direction of the slope fits the straight facet of the hexagon on the implant and abutment. Shoulder height is 1 mm, and 3mm on the anterior portion of the abutment.The slope shoulder enable esthetic results in the buccal area by concealing the crown margins under the gingiva, on the lingual or palatinal side, the crown margins allow to control over removal of excess cement.These abutments are available for implants having either standard or wide platforms.



Internal Hex.
 

MD-A0010
MD-P0030

Esthetic abutments 1mm
Esthetic abutments 3mm
MW-P0010 Wide esthetic abutments 1mm


External Hex.
 

ED-A0010
ED-P0030

Esthetic abutments 1mm
Esthetic abutments 3mm
EW-P0010 Wide esthetic abutments 1mm

  Note: The sloping shoulder is continuous with the abutment body. Its purpose is to provide a total fit between the abutment and the metal coping. The abutment body is eccentric, and therefore, the width of the shoulder is greater in the buccal area for accepting the ceramic thickness.



Esthetic Angulated Abutments

Angulated titanium abutments with an angle of 15 or 25 degrees enable an adjustment in the angle of the restoration in relation to the implant. All the angulated abutments with sloping shoulder. The direction of the slope fits the straight facet of the hexagon on the implant and abutment. Shoulder height is 1 mm, and 3mm on the anterior portion of the abutment.The slope shoulder enable esthetic results in the buccal area by concealing the crown margins under the gingiva, on the lingual or palatinal side, the crown margins allow to control over removal of excess cement.

Note: The sloping shoulder is continuous with the abutment body. Its purpose is to provide a total fit between the abutment and the metal coping. The abutment body is eccentric, and therefore, the width of the shoulder is greater in the buccal area for accepting the ceramic thickness.

Abutments use mainly in the anterior area


Internal Hex.
 

MD-A1510
MD-P1530

Esthetic 15 angulated abutment 1mm
Esthetic 15 angulated abutment 3mm
MD-A2510
MD-P2530 		Esthetic 25 angulated abutment 1mm
Esthetic 25 angulated abutment 3mm
MW-P1510 Wide esthetic 15 angulated abutment 1mm


External Hex.
 

ED-A1510
ED-P1530

Esthetic 15 angulated abutment 1mm
Esthetic 15 angulated abutment 3mm
ED-A2510
ED-P2530 		Esthetic 25 angulated abutment 1mm
Esthetic 25 angulated abutment 3mm
EW-P1510 Wide esthetic 15 angulated abutment 1mm
Copyright © 2005 MIS LTd. All rights reserved
www.mis-implants.com I newsletter - service@mis-implants.com